Analysis of Static and Dynamic Properties of Micromirror with the Application of Response Surface Method
DOI:
https://doi.org/10.1260/1750-9548.6.2.115Abstract
The paper presents the results of an application of response surface method to aid the analysis of variation of static and dynamic properties of micromirror. The multiphysics approach was taken into account to elaborate finite element model of electrostatically actuated microdevice and coupled analyses were carried out to yield the results. Used procedure of metamodel fitting is described and its quality is discussed. Elaborated approximations were used to perform the sensitivity analysis as well as to study the propagation of variation introduced by uncertain and control parameters. The input parameters deal with geometry, material properties and control voltage. As studied output characteristics there were chosen the resultant static vertical displacement of reflecting surfaces and the resonance frequency related to the first normal mode of vibration.
References
Allen J. J., Micro electro mechanical system design, Mechanical engineering 192, CRC Press, 2005.
Bao M., Analysis and design principles of MEMS devices, Elsevier Science, 2005.
Lin R. M., Wang W. J., Structural dynamics of microsystems - current state of research and future directions, Mechanical Systems and Signal Processing, 2006, 20, 1015-1043. https://doi.org/10.1016/j.ymssp.2005.08.013
Gianchandani Y., Tabata O., Zappe H., Comprehensive Microsystems, Elsevier Science, 2007.
Mawardi A., Pitchumani R., Design of microresonators under uncertainty, Journal of Microelectromechanical Systems, 2005, 14, 63-69. https://doi.org/10.1109/jmems.2004.839021
Batra R. C., Porfiri M., Spinello D., Review of modeling electrostatically actuated microelectromechanical systems, Smart Materials and Structures, 2007, 16, R23-R31. https://doi.org/10.1088/0964-1726/16/6/r01
Liu M., Maute K., Frangopol D. M., Multi-objective design optimization of electrostatically actuated microbeam resonators with and without parameter uncertainty, Reliability Engineering and System Safety, 2007, 92, 1333-1343. https://doi.org/10.1016/j.ress.2006.09.007
Martowicz A., Uhl T., Klepka A., Application of multiphysics approach to study variation of dynamic properties of MEMS structure, Proc. of ISMA 2010 Conference on Advanced Acoustics and Vibration Engineering, Leuven, Belgium, September 20-22, 2010.
Ergun A. S., Huang Y., Zhuang X., Oralkan O., Yaralıoglu G. G., Khuri-Yakub B. T., Capacitive micromachined ultrasonic transducers: fabrication technology, IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2005, 52(12), 2242-2258. https://doi.org/10.1109/tuffc.2005.1563267
Judy J. K., Microelectromechanical systems (MEMS): fabrication, design and applications, Smart Materials and Structures, 2001, 10(6), 1115-1134. https://doi.org/10.1088/0964-1726/10/6/301
Wong S. H., Kupnik M., Zhuang X., Lin D.-S., Butts-Pauly K., Khuri-Yakub B., Evaluation of wafer bonded CMUTs with rectangular membranes featuring high fill factor, IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2008, 55(9), 2053-2065. https://doi.org/10.1109/tuffc.897
Martowicz A., Stanciu I., Uhl T., Uncertainty analysis for dynamic properties of MEMS resonator supported by fuzzy arithmetics, The International Journal of Multiphysics, 2009, 3(3), 201-219. https://doi.org/10.1260/175095409788922293
Uhl T., Martowicz A., Codreanu I., Klepka A., Analysis of uncertainties in MEMS and their influence on dynamic properties, Archives of Mechanics, 2009, 61(5), 349-370.
Codreanu I., Martowicz A., Gallina A., Pieczonka L., Uhl T., Study of the effect of process induced uncertainties on the performance of a micro-comb resonator, Solid State Phenomena, 2009, 147-149, 716-725. https://doi.org/10.4028/www.scientific.net/ssp.147-149.716
Mir S., Charlot B., Courtois B., Extending fault-based testing to micromechanical systems, Journal of Electronic Testing: Theory and Applications, 2000, 16, 279-288. https://doi.org/10.1023/a:1008303717862
Montgomery D. C., Runger G., Applied statistics and probability for engineers, JohnWiley and Sons, New York, 2007.
Myers R. H., Montgomery D. C., Response Surface Methodology process and product optimization using designed experiments, John Wiley & Sons, Inc., New York, 1995.
Helton J. C., Davis F. J., Latin hypercube sampling and the propagation of uncertainty in analyses of complex systems, Reliability Engineering and System Safety, 2003, 81(1), 23-69. https://doi.org/10.1016/s0951-8320(03)00058-9
Kleiber M., Antunez H., Hien T. D., Kowalczyk P., Parameter sensitivity in nonlinear mechanics, John Wiley & Sons, Chichester, England, 1997.
Schueller G. I., Uncertainty & reliability analysis of structural dynamical systems, Mota Soares C. A., Martins J. A. C., Rodrigues H. C., Ambrósio J. A. C. [Eds.], Computational Mechanics. Solids, Structures and Coupled Problems, Springer, Dordrecht, The Netherlands, 541-554, 2006. https://doi.org/10.1007/978-1-4020-4979-8_29
Tiso P., Rixen D. J., Reduction methods for MEMS nonlinear dynamics analysis, Proc. of the IMAC-XXVIII, Jacksonville, USA, February 1-4, 2010.
Martowicz A., Uhl T., Assessment of variation of natural frequencies of FE model based on the application of alpha-cut strategy and genetic algorithms, Finite Element in Analysis and Design, 2011, 47(1), 63-71. https://doi.org/10.1016/j.finel.2010.07.012
Johnson E. A., Proppe C., Spencer B. F. Jr., Bergman L. A., Szekely, G. S. Schueller G. I., Parallel processing in computational stochastic dynamics, Probabilistic Engineering Mechanics, 2003, 18, 37-60. https://doi.org/10.1016/s0266-8920(02)00041-3
Burczynski T., Orantek P., The two-stage fuzzy strategy in identification of the uncertain boundary conditions, Proc. of AI-METH 2005 - Artificial Intelligence Methods, Gliwice, 43-51, November 16-18, 2005.
Kudrle T. D., Wang C. C., Bancu M. G., Hsiao J. C., Pareek A., Waelti M., Kirkos G. A., Shone T., Fung C. D., Mastrangelo C. H., Single-crystal silicon micromirror array with polysilicon flexures, Sensors and Actuators A, 2005, 119, 559-566. https://doi.org/10.1016/j.sna.2004.10.038
Min Y.-H., Kim Y.-K., Modeling, design, fabrication and measurement of a single layer polysilicon micromirror with initial curvature compensation, Sensors and Actuators, 1999, 78, 8-17. https://doi.org/10.1016/s0924-4247(99)00198-3
Zhou G., Cheo K. K. L., Tay F. E. H., Chau F. S., Neural network approach for linearization of the electrostatically actuated double-gimballed micromirror, Analog Integrated Circuits and Signal Processing, 2004, 40, 141-153. https://doi.org/10.1023/b:alog.0000032595.72995.62
Deb K., Gulati S., Design of truss-structures for minimum weight using genetic algorithms, Finite Elements in Analysis and Design, 2001, 37(5), 447-465. https://doi.org/10.1016/s0168-874x(00)00057-3
Dias J. P., Correa R. M., Multiobjective optimization of multibody systems with genetic algorithms, Proc. of III European Conference on Computational Mechanics, Lisbon, June 5-8, 2006. https://doi.org/10.1007/1-4020-5370-3_437
Martowicz A., Pieczara J., Uhl T., Application of soft computing in uncertainty analysis carried out within structural dynamics, Computer Assisted Mechanics and Engineering Sciences - CAMES, 2007, 14, 293-305.
Martowicz A., Pieczonka L., Uhl T., Application of uncertainty analysis in structural dynamics, Journal of KONES Powertrain and Transport, 2008, 15(1), 153-167.
Published
How to Cite
Issue
Section
Copyright (c) 2012 A Martowicz, A Klepka, T Uhl
This work is licensed under a Creative Commons Attribution 4.0 International License.