Multiphysics Study of Infrared Thermography (IRT) Applications
DOI:
https://doi.org/10.21152/1750-9548.14.3.249Abstract
The paper reviews thermographic and vibrothermography applications such as cold climate operations, determine the temperature profile of steel samples under tensile testing and perform composites Non-Destructive Testing (NDT). This review paper discusses studies, where IR thermography has been used effectively in research and development projects at the UiT The Arctic University of Norway and AGH UST. The applications discussed in this work are to determine:
- Thermal conductivity and heat transfer coefficient of freshwater and marine ice
- An industrial solution for detecting icing
- Relative required insulation (IREQ) of apparels
- Variation of tensile strength and surface temperature of steel samples under tensile testing under cold temperatures
- Vibrothermography for Non-Destructive Testing (NDT) of composites
References
Gaussorgues, G.C.S., Infrared Thermography, 1994, Chapman and Hall.
Ayele, Y.Z., Barabadi, A., Risk based inspection of offshore topsides static mechanical equipment in Arctic conditions, IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), 2016, pp. 501–506. https://doi.org/10.1109/ieem.2016.7797926
Lozowski, E., P, S.K., Makkonen, L., Computer simulation of marine ice accretion. Philos. Trans. R Soc, 2000, A 811–2845. https://doi.org/10.1098/rsta.2000.0687
Wan, Z., 1999, MODIS (Moderate Resolution Imaging Spectrometer) UCSB Emissivity Library, University of California, Santa Barbara.
EN-342, 2008, Protective clothing - Ensembles and garments for protection against cold, British Standard: Technical Committee PH/3, UK.
ISO-11079, Ergonomics of the thermal environment-Evaluation of Cold Environments, Determination of Required Clothing Insulation, IREQ, 2007 International Organization for Standardization, Geneva. https://doi.org/10.3403/01442108
A. Nowick, Internal friction in metals, Progress in Materials Science, 1953, vol. 4, pp. 60–62.
C. Zener, General theory of thermoelastic internal friction, Internal Friction in Solids, 1938, vol. 53, pp. 90–99. https://doi.org/10.1103/physrev.53.90
Rashid, T., Khawaja, H. A., Edvardsen, K. Determination of thermal properties of fresh water and sea water ice using Multiphysics analysis, The International Journal of Multiphysics, 2016, 10(3): pp. 277-291. http://dx.doi.org/10.21152/1750-9548.10.3.277
Rashid, T., Khawaja, H. A., Edvardsen, K., Mughal, U. N. Infrared Thermal Signature Evaluation of a Pure Ice Block, in Sensorcomm, International Academy, Research and Industry Association (IARIA), 2015, Venice, Italy.
Moran, M.J., Introduction to Thermal Systems Engineering: Thermodynamics, Fluid Mechanics, and Heat Transfer, 2003, Wiley.
Fukusako, S., Thermophysical properties of ice, snow, and sea ice, International Journal of Thermophysics, 1990, 11(2): p. 353-372. https://doi.org/10.1007/bf01133567
Leyli, A et al. Multiphysics Study of Forced Convection Conjugate Heat Transfer (CHT) Problem. The International Journal of Multiphysics, 2019, 13(3), ISSN 2048-3961, pp. 215- . http://dx.doi.org/10.21152/1750-9548.13.3.215.
Rashid, T., Khawaja, H. A., Edvardsen, K. Determination of Thermal Properties of Fresh Water and Sea Water Ice using Multiphysics Analysis, The International Journal of Multiphysics, 2016, 10 (3), pp. 277 – 291, ISSN 1750-9548. http://dx.doi.org/10.21152/1750-9548.10.3.277
Rashid, T., Khawaja, H. A., Edvardsen, K., Mughal, U. N. Infrared Thermal Signature Evaluation of a Pure and Saline Ice for Marine Operations in Cold Climate, Sensors & Transducers Journal, 2015, 194 (11), pp. 62-68, ISSN: 2306-8515.
Rashid, T., Khawaja, H., Edvardsen, K. Measuring Thickness of Marine Ice Using IR Thermography, Cold Regions Science and Technology, 2018, ISSN 0165-232X. http://dx.doi.org/10.1016/j.coldregions.2018.08.025
Khawaja, H. A et al. Multiphysics Simulation of Infrared Signature of an Ice Cube, The International Journal of Multiphysics, 2016, 10 (3), pp. 291-302, ISSN 1750-9548. http://dx.doi.org/10.21152/1750-9548.10.3.291
FLIR®, 2015, T1030sc, FLIR® Inc.
FLIR®, 2017, FLIR Research IR Max, FLIR® Inc.
Rashid, T., Khawaja, H.A., Edvardsen, K. Review of marine icing and anti-/deicing systems. J. Mar. Eng. Technol, 2016, 15, pp. 79–87. https://doi.org/10.1080/20464177.2016.1216734
Moran, M.J. Introduction to Thermal Systems Engineering: Thermodynamics,
Fluid Mechanics, and Heat Transfer, 2003, Wiley.
Ahmad, T et al. Study of Wind Chill Factor using Infrared Imaging. The International Journal of Multiphysics, 2016, 10(3), pp. 325-341, ISSN 2048-3961. http://dx.doi.org/10.21152/1750-9548.10.3.325
Ahmad, T., Rashid, T., Khawaja, H. A., Moatamedi, M. Study of the required thermal insulation (IREQ) of clothing using infrared imaging, The International Journal of Multiphysics, 2017, 11(4), pp. 413-426, ISSN 1750-9548. http://dx.doi.org/10.21152/1750-9548.11.4.413
Stange, E., Andleeb, Z., Khawaja, H., Moatamedi, M. Multiphysics Study of Tensile Testing using Infrared thermography. The International Journal of Multiphysics, 2019, 13(2): pp. 191 - 202. http://dx.doi.org/10.21152/1750-9548.13.2.191
Ju Feng Special Steel Co., Ltd, 2019, date accessed on 5-06-2019. https://www.jfssteel. com/en/steelDetail/DIN-9SMn28/DIN-9SMn28.html
Kwon, Y., Conner, R. Low velocity impact on polymer composite plates in contact with water. The International Journal of Multiphysics, 2016, 6(3), p. 179, ISSN 2048-3961. http://dx.doi.org/10.1260/1750-9548.6.3.179
Avachat, S., Zhou, M. Effect of core density on deformation and failure in sandwich composites subjected to underwater impulsive loads. The International Journal of Multiphysics, 2016, 6(3), pp. 241-265, ISSN 2048-3961. http://dx.doi.org/10.1260/1750-9548.6.3.241
Kwon, Y., Owens, A., Kwon, A. Experimental Study of Impact on Composite Plates with Fluid-Structure Interaction. The International Journal of Multiphysics, 2016, 4(3), pp. 259-271, ISSN 2048-3961. http://dx.doi.org/10.1260/1750-9548.4.3.259
Strand, C., Andleeb, Z., Khawaja, H., Moatamedi, M. Multiphysics Impact Analysis of Carbon Fiber Reinforced Polymer (CFRP) Shell. Materials Science Forum, 2019, 13, pp. 115-120. http://dx.doi.org/10.21741/9781644900338-20
Bennoud, S., Zergoug, M. Simulation of Cracks Detection in Tubes by Eddy Current Testing. The International Journal of Multiphysics, 2016, 10(4), pp.417-428, ISSN 2048-3961. http://dx.doi.org/10.21152/1750-9548.10.4.417
Bennoud, S., Zergoug, M., Allali, A. Numerical simulation for cracks detection using the finite elements method. The International Journal of Multiphysics, 2016, 8(1), ISSN 2048-3961, pp. 1-9. http://dx.doi.org/10.1260/1750-9548.8.1.1
Mańka, Michał, et al. PZT based tunable Interdigital Transducer for Lamb waves-based NDT and SHM. Mechanical Systems and Signal Processing, 2016, 78: 71-83.
https://doi.org/10.21152/1750-9548.13.1.85
Mańka, Michał, et al. Tunable interdigital transducers made of piezoelectric macro-fiber composite. Smart Materials and Structures, 2016, 25.11: 115022. https://doi.org/10.1515/amm-2017-0315
Roemer, J. Laser spot thermography – scanning mode. The International Journal of Multiphysics, 2019, 13(1), pp. 81-90, ISSN 2048-3961. http://dx.doi.org/10.21152/1750-9548.13.1.85
Roemer, J., et al. Nondestructive Testing of Ceramic Hip Joint Implants with Laser Spot Thermography. Archives of Metallurgy and Materials, 2017, 62.4: 2133-2139. https://doi.org/10.1088/0964-1726/25/11/115022
Pieczonka, L., & Szwedo, M. Vibrothermography. In T. Stepinski, T. Uhl, & W. J. Staszewski (Eds.), Advanced Structural Damage Detection: From Theory to Engineering Applications, 2013, pp. 233–261, Wiley. https://doi.org/10.1002/9781118536148.ch9
Pieczonka, L., Aymerich, F., Brozek, G., Szwedo, M., Staszewski, W. J., & Uhl, T, Modelling and numerical simulations of vibrothermography for impact damage detection in composites structures. Structural Control and Health Monitoring, 2013, 20(4), 626–638. https://doi.org/10.1002/stc.1483
Published
How to Cite
Issue
Section
Copyright (c) 2020 Z Andleeb, S Malik, G Hussain, H Khawaja, J Roemer, G Boiger, M Moatamedi
This work is licensed under a Creative Commons Attribution 4.0 International License.