Simulation of Cracks Detection in Tubes by Eddy Current Testing

Authors

  • S Bennoud
  • M Zergoug

DOI:

https://doi.org/10.21152/1750-9548.10.4.417

Abstract

The eddy current testing can be used such as a perfect tool to characterize defects in conducting materials. However, in the latest years, an important progress was made in the development of software for the eddy current testing simulations. Evaluation of the NDT modeling tools is the principal goal of this study. Main concerns of the aeronautic industry and the potential contribution of modeling are discussed and illustrated. Simulation by finite element method is realized with the aim to calculate the electromagnetic energy of interaction between coil and tested part that enables to deduce the impedance response. The objective of this work is the development of a code for efficient resolution of an electromagnetic problem modeling, especially, for the analysis of probe response due to the eddy current process. The validation of developed code was made. The obtained results converge quickly towards the solution given by the (FEMM) code with an average error of 0.018 for real parts of impedance and 0.004 for imaginary parts. The presented results in this work serve to illustrate that the proposed method is practical and they are also of some intrinsic interest especially in the control of aluminum tubes used in aeronautics.

References

Helifa B, Oulhadj A, Benbelghit A et. al. Detection and measurement of surface cracks in ferromagnetic materials using eddy current testing, NDT&E INT, Elsevier. 2006. 39(1):384. https://doi.org/10.1016/j.ndteint.2005.11.004

Bennoud S, Zergoug M. Modeling and development of simulations of eddy current testing for plate parts, Advanced Science Letters, Adv. Sci. Lett. 2012. Vol 15: 22-24. https://doi.org/10.1166/asl.2012.4025

Bennoud S and Zergoug M, Modeling and simulation of defects inspection in conductive multi-layered pieces by the eddy current technique, Journal of Physics: Conference Series, J. Phys.: Conf. Ser. 2015. Vol. 574, 012095. https://doi.org/10.1088/1742-6596/574/1/012095

Thomas V, Joubert P Y, Vourch E, Study for the design of an eddy current array probe for the imaging of aeronautical fastener holes, Sensor Letter, 2009, 7(3): 460-465. https://doi.org/10.1166/sl.2009.1073

Ahmed Haddad, Mourad Zergoug, Mohamed Azzaz et al, Monitoring of metal powder by eddy current, Int. J. of Microstructure and Materials Properties - 2010. Vol. 5(1):3-14. https://doi.org/10.1504/ijmmp.2010.032497

Watremez M, Méresse D, Dubar L and Brocail J. Finite element modelling of orthogonal cutting: sensitivity analysis of material and contact parameters, Int. J. of Simulation and Process Modelling, 2012.7(4), 262-274. https://doi.org/10.1504/ijspm.2012.049820

Kogl M, Hurlebaus S, Gaul L. Finite element simulation of non-destructive damage detection with higher harmonics. NDT&E International. 2004. 37: 195-205. https://doi.org/10.1016/j.ndteint.2003.09.003

Nagata S, Enokizono M. Numerical simulations and experiments of eddy current tests under various excitation methods, Journal of Materials Processing Technology. 2005. 161: 353-358. https://doi.org/10.1016/j.jmatprotec.2004.07.050

Gu Y T, Zhang L C. Coupling of the mesh free and finite element methods for determination of the crack tip fields. Engineering Fracture Mechanics. 2008. 75(5): 986-1004. https://doi.org/10.1016/j.engfracmech.2007.05.003

Bennoud S, Zergoug M and Allali A, ‘Numerical Simulation for Cracks Detection Usingthe Finite Elements Method’, International Journal of Multiphysics (IJM). 2014, 8(1), 1-10. https://doi.org/10.1260/1750-9548.8.1.1

Dodd C V., Cheng C C., Deeds W E. Induction coils coaxial with an arbitrary number of cylindrical conductors, Journal of Applied Physics, 1974, 45(2): 638-647. https://doi.org/10.1063/1.1663297

Koliskina V, Volodko I. Analytical solution of an eddy current problem for a two-layer tube with varying properties, ACELAE'11 Proceedings of the 10th WSEAS international conference on communications, electrical & computer engineering, and 9th WSEAS international conference on Applied electromagnetics, wireless and optical communications. 2011. 262- 265.

Fan M, Huang P et al. Analytical modeling for transient probe response in pulsed eddy current testing. NDT & E Int.2009. 42(5): 376-383. https://doi.org/10.1016/j.ndteint.2009.01.005

Skarlatos. A and Theodoulidis T. P. Solution to the eddy-current induction problem in a conducting half-space with a vertical cylindrical borehole, Proc. R. Soc. A. 2012. 468: 1758-1777. https://doi.org/10.1098/rspa.2011.0684

Grimberg R, Savin A, and Steigmann R, Automated eddy current data analysis, Int. J. of Materials and Product Technology, 2011, Vol. 41, No.1/2/3/4:75-88. https://doi.org/10.1504/ijmpt.2011.040287

Grimberg R, Savin A, and Steigmann R, Eddy current inner transducer with rotating magnetic field: application to PHWRs pressure tubes. Int. J. of Materials and Product Technology, 2006.26(1/2): 177-186. https://doi.org/10.1504/ijmpt.2006.008988

Bennoud S and Zergoug M, Numerical simulation of cracks detection by eddy current testing in aluminum tubes, 2nd International Conference on Automation, Control, Engineering and Computer Science (ACECS-2015), Sousse, Tunisia, March 22-24, 2015

Published

2016-12-31

How to Cite

Bennoud, S., & Zergoug, M. (2016). Simulation of Cracks Detection in Tubes by Eddy Current Testing. The International Journal of Multiphysics, 10(4), 417-426. https://doi.org/10.21152/1750-9548.10.4.417

Issue

Section

Articles