Study on development of vessel for shock pressure treatment for food
DOI:
https://doi.org/10.1260/175095407780130490Abstract
In recent years, the food processing using high-energy pressure pulse is gaining attention due to no heat evolution in the process. In this study a vessel was designed for the shock pressure treatment of food. An underwater shock wave generated by the detonating fuse was applied as the source of high-energy pressure pulse. The underwater shock wave was investigated by optical observation and pressure measurement experiments. The results are then compared with the computer simulation using LS-DYNA code. The agreement between the experimental results and the numerical analysis is found to be good. The food processing of apple was performed using the designed vessel. The hardness of the apple has decreased showing the effectiveness of the newly designed vessel.
References
Acim M. Loske, Ulises M. Alvarez, Claudia Hernandez-Galcia, Eduardo Catano-Tostado, and Fernando E. Prieto, “ Bactericidal effect of underwater shock waves on Escherichia coli ATOC 10536 suspensions” 2002, Innovative Food Science & Emerging Technologies 3, pp.321-327. https://doi.org/10.1016/s1466-8564(02)00031-0
Ulises M. Alvarez, Achim M. Loske, Eduardo Castano-Tostado, and Fernando E. Prieto, “ Inactivation of Escherichia coli O157:H7, Salmonella Typhimurium and Listeria monocytogenes by underwater shock waves”, 2004, Innovative Food Science and Emerging Technologies 5, pp.459-463. https://doi.org/10.1016/j.ifset.2004.07.002
A. Takemoto, A. Oda, M. Iwahara, and S. Itoh, “ On sterilization using the underwater shock wave under non-heating environment”, Proc. of 2006 ASME Pressure Vessels and Piping Conference, ISBN 0-7918- 3782-3, I749CD, 2006. https://doi.org/10.1115/pvp2006-icpvt-11-93443
A. Oda, T. Watanabe, and S. Itoh, “ Basic study on pressure vessel for food processing by shock loading”, Proc. of 2006 ASME Pressure Vessels and Piping Conference, ISBN 0-7918-3782-3, I749CD, 2006. https://doi.org/10.1115/pvp2006-icpvt-11-93482
J. O. Hallquist, “LS-DYNA Theoretical Manual”, Livermore Software Technology Corporation, Livermore, 1998
M. A. Meyers, “Dynamic Behavior of Materials”, A Wiley-Interscience Publication, New York, 1994, Chap. 7
S. P. Marsh, “ LASL Shock Hugoniot Data” , University of California Press, 1980
M. Nagahara, S. Matsumoto, and S. Itoh, “ On shock loading the KARAMATSU wood for protecting the fire” , Proc. of Energetic technology in fluids, structures, and fluid-structure interactions, PVP-Vol. 485-2, pp. 33-37, 2004. https://doi.org/10.1115/pvp2004-2878
S. Itoh, S. Nagano, and M. Fujita, “ The features of the Assembly for Punching of Pipes by Using the Converging Underwater Shock Wave” , Proceedings of the J.S.M.E. , 1994, Vol.948-3
N. Aquelet, M. Souli, and L. Olovsson, “ Euler-Lagrange coupling with damping effects: Application to slamming problem” , 2006, Computer Methods in applied Mechanics and Engineering, 195, pp.110-132. https://doi.org/10.1016/j.cma.2005.01.010
M. Souli, A. Ouahsine, and L. Lewin, “ ALE formulation for fluid-structure interaction problems” , 2000, Computer methods in applied mechanics and engineering, 190, pp.659-675. https://doi.org/10.1016/s0045-7825(99)00432-6
E. L. Lee, H. C. Hornig, and J. W. Kury, “ Adiabatic expansion of high explosive detonation products” , Lawrence Radiation Laboratory, University of California, 1968, UCRL-50422. https://doi.org/10.2172/4783904
S. Itoh, H. Hamashima, K. Murata, and Y. Kato, “ Determination of JWL parameters from underwater explosion test” , Proc. of 12th International Detonation Symposium, 2002, pp.281-285
Published
How to Cite
Issue
Section
Copyright (c) 2007 M Otsuka, H Maehara, M Souli, S Itoh
This work is licensed under a Creative Commons Attribution 4.0 International License.