Study the damping and vibrational properties of polycarbonate reinforced ZrO2
DOI:
https://doi.org/10.21152/1750-9548.16.1.31Abstract
In this paper, the effect of nano zirconia particles on damping characteristics of polycarbonate composites was investigated experimentally. The nano particles were added to polycarbonate matrix with five different weight percentage (wt %). Polycarbonate Nanocomposites filled with pristine and modified Zirconium dioxide were prepared by simple melt compounding. All samples were prepared by an injection molding process. The samples were studied before and after damage. Damage process was done with high velocity impact. The half-power bandwidth method was used to experimentally estimate the damping ratio. The experiments were designed based on an impulse actuator signal generated by the shaker, and the responses were recorded using accelerometer sensors. The results of experiments showed that the damping properties of the composite were increased by adding nanoparticles to 3 wt% and decreased gently for samples with the upper content of nanoparticles. Transmission electron microscopy (TEM) pictures were used to investigate the distribution of nano zirconia on the polycarbonate matrix and showed a homogeneous mixture of nanocomposites and strong bonding between zirconia and polycarbonate that increased damping properties and decreased vibration. Finally, the experimental modal analysis test was done after high-velocity impact damage process to investigate the effect of defection on the nano polycarbonate composites. The results showed a great decline in vibration and an increase of damping properties.
References
W. Hu, Y. Wang, J. Yu, C.-F. Yen, F. Bobaru, Impact damage on a thin glass plate with a thin polycarbonate backing, International Journal of Impact Engineering 62 (2013) 152-165. https://doi.org/10.1016/j.ijimpeng.2013.07.001
J. Othmezouri-Decerf, Interpretation of the mechanical damping behaviour of glassy polycarbonate strained in the non-linear range of deformation below the yield point, Polymer 29(4) (1988) 641-645. https://doi.org/10.1016/0032-3861(88)90078-X
B. Wang, H. Lu, G. Tan, W. Chen, Strength of damaged polycarbonate after fatigue, Theoretical and Applied Fracture Mechanics 39(2) (2003) 163-169. https://doi.org/10.1016/S0167-8442(02)00156-8
A.R.G.a.M. Mohandes, The effect of finite strain on the nonlinear free vibration of a unidirectional composite Timoshenko beam using GDQM, Advances in Aircraft and Spacecraft Science Volume 3, (Number 4), (2016) pages 379-397. https://doi.org/10.12989/aas.2016.3.4.379
J.-M. Berthelot, Damping Analysis of Orthotropic Composites with Interleaved Viscoelastic Layers: Modeling, Journal of Composite Materials 40(21) (2006) 1889-1909. https://doi.org/10.1177/0021998306061302
K. Xu, S. Zhou, L. Wu, Effect of highly dispersible zirconia nanoparticles on the properties of UV-curable poly(urethane-acrylate) coatings, Journal of Materials Science 44(6) (2009) 1613-1621. https://doi.org/10.1007/s10853-008-3231-8
Y. Kurita, K. Sakai, H. Shizuka, The Effect of Cutting-Edge Sharpness on Cutting Characteristic of Polycarbonate, in: R. Jabłoński, R. Szewczyk (Eds.) Recent Global Research and Education: Technological Challenges, Springer International Publishing, Cham, 2017, pp. 55-61. https://doi.org/10.1007/978-3-319-46490-9_8
Y. Imai, A. Terahara, Y. Hakuta, K. Matsui, H. Hayashi, N. Ueno, Transparent poly(bisphenol A carbonate)-based nanocomposites with high refractive index nanoparticles, European Polymer Journal 45(3) (2009) 630-638. https://doi.org/10.1016/j.eurpolymj.2008.12.031
A.M. Magerramov, M.A. Ramazanov, F.V. Hajiyeva, A study of the structure and dielectric properties of nanocomposites based on polypropylene and zirconia nanoparticles, Surface Engineering and Applied Electrochemistry 49(5) (2013) 355-358. https://doi.org/10.3103/S1068375513050062
D. Schauries, P. Mota-Santiago, E.P. Gilbert, N. Kirby, C. Trautmann, P. Kluth, Structure, morphology and annealing behavior of ion tracks in polycarbonate, European Polymer Journal 108 (2018) 406-411. https://doi.org/10.1016/j.eurpolymj.2018.09.025
A.S. Ashour, Buckling and vibration of symmetric laminated composite plates with edges elastically restrained, Steel and Composite Structures Volume 3, (Number 6), (2003), pages 439-450. https://doi.org/10.12989/scs.2003.3.6.439
M. Rafiee, F. Nitzsche, M.R. Labrosse, Fabrication and experimental evaluation of vibration and damping in multiscale graphene/fiberglass/epoxy composites, Journal of Composite Materials 53(15) (2019) 2105-2118. https://doi.org/10.1177/0021998318822708
Viglietti, E. Zappino, E. Carrera, Free vibration analysis of locally damaged aerospace tapered composite structures using component-wise models, Composite Structures 192 (2018) 38-51. https://doi.org/10.1016/j.compstruct.2018.02.054
K. Luo, S. Zhou, L. Wu, B. You, Preparation and properties of cross-linked zirconia nanoparticle films on polycarbonate, Thin Solid Films 518(23) (2010) 6804-6810. https://doi.org/10.1016/j.tsf.2010.06.035
Y. Rostamiyan, A. Ferasat, High-speed impact and mechanical strength of ZrO2/polycarbonate nanocomposite, International Journal of Damage Mechanics 26(7) (2016) 989-1002. https://doi.org/10.1177/1056789516644312
M. Aydogdu, On the vibration of aligned carbon nanotube-reinforced composite beams, Advances in Nano Research Volume 2(Number 4) (2014,) pages 199-210. https://doi.org/10.12989/anr.2014.2.4.199
E. Agosti, G. Zerbi, I.M. Ward, Structure of the skin and core of ultra-drawn polyethylene films by vibrational spectroscopy, Polymer 33(20) (1992) 4219-4229. https://doi.org/10.1016/0032-3861(92)90261-T
G. Jin, T. Ye, X. Ma, Y. Chen, Z. Su, X. Xie, A unified approach for the vibration analysis of moderately thick composite laminated cylindrical shells with arbitrary boundary conditions, International Journal of Mechanical Sciences 75 (2013) 357-376. https://doi.org/10.1016/j.ijmecsci.2013.08.003
W.A. Oke, Y.A. Khulief, Effect of internal surface damage on vibration behavior of a composite pipe conveying fluid, Composite Structures 194 (2018) 104-118. https://doi.org/10.1016/j.compstruct.2018.03.098
Z.-X. Wang, P. Qiao, J. Xu, Vibration analysis of laminated composite plates with damage using the perturbation method, Composites Part B: Engineering 72 (2015) 160-174. https://doi.org/10.1016/j.compositesb.2014.12.005
A.G.a.F.T.-B. B. Afsharmanesh, Buckling and vibration of laminated composite circular plate on Winkler-type foundation, Steel and Composite Structures Volume 17 (Number 1) (2014), pages 1-19. https://doi.org/10.12989/scs.2014.17.1.001
R.M.-D.a.K. Behdinan, Thermoelastic static and vibrational behaviors of nanocomposite thick cylinders reinforced with graphene, Steel and Composite Structures, Volume 31 (Number 5,) (2019), pages 529-539.
Y. Rostamiyan, H. Youseftabar, R. Azadi, Experimental study on the effect of nano zirconia on mechanical strength and microstructure of damaged epoxy-nanocomposites, Materials Research Express 6(2) (2018) 025046. https://doi.org/10.1088/2053-1591/aaef67
R.J. Meier, H. Vansweefelt, Some comments on the analysis of vibrational bands in strained polymers: polyethylene, Polymer 36(20) (1995) 3825-3829. https://doi.org/10.1016/0032-3861(95)99776-Q
T.Y. Zhao, Y.S. Cui, H.G. Pan, H.Q. Yuan, J. Yang, Free vibration analysis of a functionally graded graphene nanoplatelet reinforced disk-shaft assembly with whirl motion, International Journal of Mechanical Sciences 197 (2021) 106335. https://doi.org/10.1016/j.ijmecsci.2021.106335
F.L.M. dos Santos, B. Peeters, H. Van der Auweraer, L.C.S. Góes, W. Desmet, Vibration-based damage detection for a composite helicopter main rotor blade, Case Studies in Mechanical Systems and Signal Processing 3 (2016) 22-27. https://doi.org/10.1016/j.csmssp.2016.01.001
N.M. Healey, The Optimal Global Integration-Local Responsiveness Tradeoff for an International Branch Campus, Research in Higher Education 59(5) (2018) 623-649. https://doi.org/10.1007/s11162-017-9480-0
L.J. Wangbao Zhou, Zhi Huang and Shujin Li Flexural natural vibration characteristics of composite beam considering shear deformation and interface slip Steel and Composite Structures. Volume 20, (Number 5,) (2016) pages 1023-1042. https://doi.org/10.12989/scs.2016.20.5.1023
N.-I. Kim, S. Kim, J. Lee, Vibration-based damage detection of planar and space trusses using differential evolution algorithm, Applied Acoustics 148 (2019) 308-321. https://doi.org/10.1016/j.apacoust.2018.08.032
H. Ozturk, Vibration analysis of a pre-stressed laminated composite curved beam, Steel and Composite Structures, 2015, 19(3), pp. 635-659. https://doi.org/10.12989/scs.2015.19.3.635
S.H.a.M.C. Manna, A high precision shear deformable element for free vibration of thick/thin composite trapezoidal plates Steel and Composite Structures Volume 3 (Number 3) (2003) pages 213-229. https://doi.org/10.12989/scs.2003.3.3.213
O. Civalek, Free vibration analysis of composite conical shells using the discrete singular convolution algorithm, Steel and Composite Structures Volume 6 (Number 4) (2006), pages 353-366. https://doi.org/10.12989/scs.2006.6.4.353
A.R.G.a.M. Mohandes, The effect of finite strain on the nonlinear free vibration of a unidirectional composite Timoshenko beam using GDQM, Advances in Aircraft and Spacecraft Science Volume 3, (Number 4), (2016) pages 379-397. https://doi.org/10.12989/aas.2016.3.4.379
Ifrim, M. - Dinamica structurilor si inginerie seismica, Editura Didactică si Pedagogica, Bucureşti, (1984).
Published
How to Cite
Issue
Section
Copyright (c) 2022 M Afzali, Y Rostamiyan
This work is licensed under a Creative Commons Attribution 4.0 International License.