Stress analysis of automotive ventilated disc brake rotor and pads using finite element method
DOI:
https://doi.org/10.21152/1750-9548.10.1.75Abstract
The complexity of the physical or technological systems to be developed or studied led to employing numerical methods based on the principle of an approach as possible nominal solution, but these require large computations requiring efficient computers. The computer code ANSYS also allows the determination and the visualization of the structural deformations due to the contact of slipping between the disc and the pads. The results of the calculations of contact described in this work relate to displacements, Von Mises stress on the disc, contact pressures of the inner and outer pad at various moments of simulation. One precedes then the influence of some parameters on the computation results such as rotation of the disc, the smoothness of the mesh, the material of the brake pads and the friction coefficient enter the disc and the pads, the number of revolutions and the material of the disc, the pads groove.
References
Tajan N. and Mac-Lan. T., “Modélisation thermomécanique des disques de freinpar une approche eulérienne.” Thèse de doctorat de l’école polytechnique-spécialité mécanique des solides. (2002).
Reibenschuh, M. Oder, G. Čuš F. and Potrč. I., “Modelling and Analysis of Thermal and Stress Loads in Train Disc Brakes.” Stro. JVestn-J. Mech. E., 55(7-8), (2009), 494-502.
Subramanian, P M., and Oza. D., “Strength analysis of a ventilated brake disc-hub assembly for a multi-utility vehicle.” Int. Res. J. Eng. Technol. (2(2), (2015) 726-730.
Shinde, N. B. and Borkar B. R., “CAD & F.E.M. Analysis of disc brake system”.J.Eng.Comput.Sci.,4(3), (2015), 10697-10706.
Jungwirth, F. Dornheim, A. and Friedrich. C., “Coupled thermo-mechanical computation method for a virtual design processes of brake discs”, Proc. 11th World Congress on Computational Mechanics (WCCM XI), (2014), pp.1-10.
Söderberg A. and Andersson, S., “Simulation of wear and contact pressure distribution at the pad-to-rotor interface, in the disc brake using general purpose finite element analysis software ”, Wear 267,12(1), (2009). pp. 2243–2251. https://doi.org/10.1016/j.wear.2009.09.004
Abdullah, O.I. Schlattmann J. and Al-Shabibi. A.M., “Stresses and deformations analysis of a dry friction clutch system”, Proc. 13th International Conference on Tribology, Serbiatrib’ 13, Kragujevac, Serbia, (2013) pp.210-216, 15-17.
Dhiyaneswaran, S. and Amirthagadeswaran .K. S., “Comparative Study of Disc Brake Materials through Computer Aided Engineering.” Int. J. Mod. Eng. Res. (2014). pp. 173-179.
Sharath Kumar, T. and Vinodh.S. “Novel Design and Analysis of a Brake Rotor.” World Acad. Sci Eng Technol, 6(1), (2012), pp. 523-525.
Belhocine, A. and Bouchetara, M., “Thermomechanical modeling of dry contact in automotive disc brake.” Int. J. Therm. Sci., 60, (2012). pp. 161–170. https://doi.org/10.1016/j.ijthermalsci.2012.05.006
Belhocine, A., Ghazali, N.M. and Abdullah O.I., “Structural and Contact Analysis of a 3-Dimensional Disc-Pad Model with and without Thermal Effects”, Tribol. Ind., 36(4), (2014). pp. 406-418.
Belhocine, A., Abu Bakar, A.R. and Abdullah, O.I., “Structural and Contact Analysis of Disc Brake Assembly During Single Stop Braking Event”, Trans Ind Inst Met, 68(3), (2015) pp. 403-410. https://doi.org/10.1007/s12666-014-0468-6
Yildiz, Y. and Duzgun. M., “Stress analysis of ventilated brake discs using the finite element method” Int. J. Auto. Tech, 11(1), (2010), pp. 133-138. https://doi.org/10.1007/s12239-010-0018-0
Magnain. B., “Développement d’algorithmes et d’un code de calcul pour l’étude des problèmes de l’impact et du choc.” Thèses de doctorat de l’université d’évry –val d’essonne, Novembre (2006)
Coudeyar. N., “Analyse non-linéaire des instabilités multiples aux interfaces frottantes:Application au crissement de frein” Thèse de doctorat de l’école centrale de Lyon-spécialité: mécanique, December (2009)
Abu Bakar, A. R., Ouyang H. and Cao, Q., “Interface Pressure Distributions through Structural Modifications”. SAE Technical Paper 2003-01-3332, (2003). https://doi.org/10.4271/2003-01-3332
Cueva, G., Sinatora, A. Guesser,, W.L. Tschiptschin, A.P., “Wear resistance of cast irons used in brake disc rotors ”, Wear 255, (2003) 1256–1260. https://doi.org/10.1016/s0043-1648(03)00146-7
Published
How to Cite
Issue
Section
Copyright (c) 2016 A Belhocine, W Omar
This work is licensed under a Creative Commons Attribution 4.0 International License.